How Do You Fix a Broken Makeup Palette Without Alcohol?

If you’ve ever dropped a palette or opened your makeup bag only to find everything coated in a powdery mess, you’re not alone. Every beauty junkie has probably experienced the heartache of seeing their favorite eyeshadow palette, foundation, or blush shattered into pieces.

Hard as we might try to keep our makeup products in pristine condition, beauty-related accidents are bound to happen. And when they do, sometimes we think that the only solution is to toss the makeup and buy a new one, which is definitely quite devastating if you splurged on a premium product. Fortunately, there are ways to fix broken makeup, which can save you a couple of bucks, as well as the trouble of going to the store to buy a new palette.

You can find a ton of tutorials online on how to fix broken powder makeup, but they typically involve adding a few drops of rubbing alcohol into the powder. If you’re not crazy about the idea of putting alcohol in your favorite products, don’t worry, we’ve got you covered.

You can find a ton of tutorials online on how to fix broken powder makeup, but they typically involve adding a few drops of rubbing alcohol into the powder. If you’re not crazy about the idea of mixing alcohol into your favorite products, don’t worry because we’ve found three super-simple (but equally effective) methods. Keep reading for a step-by-step guide on how to fix broken powders.

Setting Spray

Step 1: Crush the broken powder into smaller pieces

This might seem counterintuitive, but crushing up the broken pieces of your powder makeup prevents lumps and will result in a more even final product.

With a toothpick, break up all the chunks of broken powder until you have a fine powder. You can also use the tip of a makeup brush or a small spatula for this.

If the pan is too small, transfer the makeup into a small bowl. This will help make mixing easier and keep your compact clean.

Step 2: Add setting spray

With your setting spray of choice, add a few drops or spritzes to the loose powder. Start with one to two drops for a small pan of eyeshadow and three to four drops for larger products like blush or powder compacts. Mix it until fully incorporated. It should look like a thick paste. If it’s still dry, add more setting spray one drop at a time. Once you achieve the desired consistency, pour it back into the original container.

Step 3: Flatten and smoothen

Use a spoon or makeup spatula to spread the mixture evenly into the pan. Depending on the surface area of your makeup, you can also use a quarter or nickel covered in saran wrap to press the powder. Hold it down for 10 seconds, then slowly lift the coin. Once the mixture has been flattened, smooth over the entire surface with an eyeshadow brush.

Step 4: Clean up

This process can get quite messy, so don’t worry if you accidentally dirty up your eyeshadow palette or compact. Simply use a tissue to wipe off the edges. If the mixture dries up, use an eyeshadow brush dipped in a bit of water or rubbing alcohol to get rid of any smears.

Step 5: Let it dry

Now that your powder has been pressed into place, let it dry for a few hours. Ideally, you should leave it overnight. It’ll be ready to use the next day!

Makeup Wipes

This method is super easy to do and works on any powder makeup, from broken blush to bronzer to eyeshadow. Use a toothpick to crush the powder into small pieces. Grind it up as much as possible; the finer the powder is, the better it will turn out.

Then, place a makeup wipe over the powder and press down firmly with your finger for about five to 10 seconds. Keep pressing until the loose bits of powder solidify and no lumps remain. For smoother results, take a coin or any object with a flat surface and wrap this in a makeup wipe. Use this to press down the powder.

Once everything has been pressed firmly into place, your makeup will be ready for use.

Turn It Into a Loose Powder

As much as you wish you could go back in time, a broken blush, bronzer, or face powder is still completely usable. In fact, you can embrace its new state entirely by turning it into a loose powder.

Place the broken powder into a sealable bag, then use the back of a spoon to crush it into a fine powder. Empty the contents into a small sieve, then sift to remove any lumps. Place this into a clean container, and voíla, you’ve got yourself a perfectly good loose powder!

source https://degreesofvanity.com/how-do-you-fix-a-broken-makeup-palette-without-alcohol/